Description

3 Roller Grain Mill With 5kg Hopper - Mammoth

With three rollers, all your grain will be crushed twice in one cycle for the perfect professional grade crush and for maximum efficiency.

The initial crush is through the top two rollers which you can adjust the gap between the two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller.

The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage. The Mammoth 3 roller grain mill is constructed using materials that will last a lifetime. It has stainless steel rollers, aluminum body, stainless hopper and bronze bushings.

This adjustable 3 roller mill offers a professional grade crush for barley, wheat and other cereals. The hopper can hold up to 5kg of grain and the rollers can be reversed for left or right-handed operation. A hand crank is included, but the mill can be easily motorized with an electric drill for faster and easier use.

It is recommended to adjust the top roller a bit wider than the lower third roller.

Features

• Width and roller diameter is optimized for use with a power drill.
• Adjustable rollers to give uniform crush.
• 12 TPI knurls to efficiently pull grain through, while leaving hulls intact.
• 152mm long adjustable gap.
• 0.060 fixed primary gap, 0-0.065 fully adjustable secondary gap.
• 3.6kg / minute is average throughput.
• 152mm x 38mm diameter steel rollers.
• Reversible Rollers.
• Durable alloy frame.
• SAE 841 oil impregnated bronze bushings.
• Integral drive shaft and axles.

Specifications

• Rollers: Stainless steel
• Grinder housing: Aluminum 6061
• Hopper: Stainless steel
• Total height: 280mm (11”)
• Hopper dimensions at top: 223mm (8.77”) x 210mm (8.26”)
• Footprint size of grinder: 150mm (5.9”) x 88mm (3.46”)
• Dimensions: 80mm (3.15”) x 150mm (5.9”) x 80mm (3.15”)
• Steel Rollers: ø 32mm (1.2”) x 125mm (4.9”)
• Adjustable distance: 0.025 – 0.1 inch (0.635 – 2.54mm)
• Crank handle: 200mm (7.9”)