Description

Five Star IO Star Sanitizer 16oz:

IO-Star is a low foaming iodophor sanitizer. Easy to use Economical dilution ratio Controls water hardness Self-indicating EQUIPMENT SANITIZING:  To pre-clean equipment, circulate with cold or lukewarm water with a solution of 1 ounce IO-STAR to 5 gallons water. Rinse with potable water. To sanitize, spray or immerse equipment with a fresh solution of 1 ounce IO-STAR to 5 gallons cold or lukewarm water (provides 25 ppm titratable iodine). Allow a one minute contact time. When ready to use, drain sanitizing solution. TANK SANITIZING: Pre-clean with 1 ounce IO-STAR to 5 gallons water (not hot). Rinse with potable water. To sanitize, spray or fill vat with 1 ounce IO-STAR to 5 gallons water (provides 25 ppm titratable iodine). After 5 minutes, drain off solution. SANITATION OF WORK SURFACES: Pre-clean surface by scraping or flushing to remove soil. Then thoroughly clean with a solution 2 ounces of IO-STAR to 5 gallons of water. Rinse with potable water. Sanitize with a solution containing 1 ounce of IOSTAR to 5 gallons of water (provides 25 ppm titratable iodine). Allow 2 minutes contact time. Do not rinse. SANITIZING OF BEVERAGE CONTAINERS: To sanitize previously cleaned beverage containers, which were first washed in detergent and rinsed, use a solution containing 1 ounce IO-STAR to 5 gallons of water (provides 25ppm titratable iodine). Allow for a one minute contact time. Invert containers, drain and allow to air dry.