Êtes-vous à la recherche d’un produit particulier ?


Régulateur secondaire pour CO2 passe-droit avec raccord 5/16” - Taprite

Régulateur secondaire pour CO2 passe-droit avec raccord 5/16” - Taprite

UGS :11048

En rupture d'inventaire


Taprite Single Product Secondary CO2 Regulator - 5/16" Barbed Pass-Thru (T1661STC-01


  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.
  • Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.
  • Body parts are 1/4" NPT (Right hand thread)
  • 5/16" OD barbs on each side of the regulator.
  • Outlet fittings feature Taprite 1600 ball type shut-off with 5/16" OD barb.
  • 5" Wide and 6 3/4" Tall.
  • All models have heavy duty stainless steel wall mounting brackets.
  • Working pressure range is 0-50 psi.
  • Non-removable adjusting screw limits maximum delivery pressure to 50 PSIG.
  • Front loading seat assembly is easily replaceable in the field.
  • 60psi Gauge